bekomme meine Tank nicht aus dem "Starting" Bereich , die 3 Dateien auf dem USB Stick usw.
aber die Box zickt .....
als Anhang den Log ( was ich selbst erkennen konnte waren u.a. "Bad Blocks"
- [+] Spoiler
Starting Microloader ASM built on Jan 08 2014 14:32:26...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: APOLLO
Found External Realtek 8211EG PHY on GMAC0...
Checking for Guide button press ...
Waiting for flash downloading ...
Starting Microloader ASM built on Jan 08 2014 14:32:26...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: APOLLO
Found External Realtek 8211EG PHY on GMAC0...
Checking for Guide button press ...
Waiting for flash downloading ...
Starting Microloader ASM built on Jan 08 2014 14:32:26...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: APOLLO
Found External Realtek 8211EG PHY on GMAC0...
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
Setting up default ATAG list...
Jumping to U-Boot ...
9
--------------------------------------------------------------------------------
| U-Boot 2009.08-00048-g19618f5 (Dec 24 2013 - 17:45:56) CST HDx |
|------------------------------------------------------------------------------|
| Chipset information |
| Vendor: NXP Type: Apollo Revision: M1 Fuses: 0015706B |
|------------------------------------------------------------------------------|
| Clock information |
| *** not available yet *** |
|------------------------------------------------------------------------------|
| Frontpanel information |
| Vendor: CST Version: 4.1 Display: OLED (256 x 64 px) |
|------------------------------------------------------------------------------|
| Memory configuration |
| Start | End | Type | Description |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM | System main memory bank #0 (256M) |
| 20000000 | 2FFFFFFF | RAM | System main memory bank #1 (256M) |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) |
*** Warning - bad CRC or SFC, using default environment
| 00000000*| 3FFFFFFF*| NAND | Toshiba TC58NVG3S0F 8G 3.3V 8-bit |
|------------------------------------------------------------------------------|
| Network configuration |
| MAC: LIP 6300 address: 00-C5-5C-29-BB-32 |
--------------------------------------------------------------------------------
Hit any key to stop autoboot: 0
SFC read: offset 0x100000, size 0x300000
3145728 bytes read: OK
## Booting kernel from Legacy Image at 01000000 ...
Image Name: NI Apollo Kernel
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2971088 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.10.93 (neutrino-images@nisrv) (gcc version 6.3.1 20170109 (crosstool-NG crosstool-ng-1.23.0-36-g1dbb06f2-dirty) ) #1 SMP Tue Dec 8 00:23:57 CET 2020
[ 0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Entropic Apollo STB Platform with FDT, model: CoolStream HD2 Apollo STB
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Early platform io descriptors mapping...
[ 0.000000] PERCPU: Embedded 7 pages/cpu @80910000 s5952 r8192 d14528 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=nx_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);nx_2017:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rootflags=noatime rw
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 256MB 256MB = 512MB total
[ 0.000000] Memory: 246960k/246960k available, 277328k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
[ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80679dc4 (6600 kB)
[ 0.000000] .init : 0x8067a000 - 0x806a9740 ( 190 kB)
[ 0.000000] .data : 0x806aa000 - 0x806ebd60 ( 264 kB)
[ 0.000000] .bss : 0x806ebd60 - 0x80707424 ( 110 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:388
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] smp_twd: clock not found -2
[ 0.000000] Unable to get timer clock. Assuming 50Mhz input clock.
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] stb-timer: system timer (irq = 58, rate 50000000)
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.253813] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.292713] pid_max: default: 32768 minimum: 301
[ 0.297594] Mount-cache hash table entries: 512
[ 0.304464] CPU: Testing write buffer coherency: ok
[ 0.309629] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.315286] Setting up static identity map for 0x803dd018 - 0x803dd070
[ 0.321853] L310 cache controller enabled
[ 0.325779] l2x0: 8 ways, CACHE_ID 0x410004c4, AUX_CTRL 0x32421001, Cache size: 131072 B
[ 0.334580] Brought up 1 CPUs
[ 0.337460] SMP: Total of 1 processors activated (996.14 BogoMIPS).
[ 0.343700] CPU: All CPU(s) started in SVC mode.
[ 0.349176] devtmpfs: initialized
[ 0.360706] NET: Registered protocol family 16
[ 0.365844] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.519237] GMAC0: active interface is 6
[ 0.523171] ChipID=0x1 ChipRevID=0x2
[ 0.526781] nx_dmac: Registered with 8 channels
[ 0.536887] bio: create slab <bio-0> at 0
[ 0.541561] GPIO: base febd5000 (phys e06d5000)
[ 0.546222] GPIO: base feb69000 (phys e0669000)
[ 0.551276] SCSI subsystem initialized
[ 0.555438] usbcore: registered new interface driver usbfs
[ 0.560921] usbcore: registered new interface driver hub
[ 0.566265] usbcore: registered new device driver usb
[ 0.571360] pps_core: LinuxPPS API ver. 1 registered
[ 0.576222] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.585334] PTP clock support registered
[ 0.590332] cfg80211: Calling CRDA to update world regulatory domain
[ 0.597737] Switching to clocksource timer_us
[ 0.609893] NET: Registered protocol family 2
[ 0.615211] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.622306] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.628726] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.635051] TCP: reno registered
[ 0.638198] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.644041] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.650555] NET: Registered protocol family 1
[ 0.655201] RPC: Registered named UNIX socket transport module.
[ 0.661058] RPC: Registered udp transport module.
[ 0.665681] RPC: Registered tcp transport module.
[ 0.670357] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.676940] PM: STB Platform power mgmt initialization.
[ 0.825239] bounce pool size: 64 pages
[ 0.836187] NFS: Registering the id_resolver key type
[ 0.841267] Key type id_resolver registered
[ 0.845351] Key type id_legacy registered
[ 0.849341] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.855792] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.863238] msgmni has been set to 482
[ 0.868098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.875438] io scheduler noop registered
[ 0.879271] io scheduler deadline registered
[ 0.883733] io scheduler cfq registered (default)
[ 0.888727] e06e2000.serial: ttyS0 at MMIO 0xe06e2000 (irq = 47) is a uart-ip3106
[ 0.900817] loop: module loaded
[ 0.904321] ahci-stb e0638000.sata: unable to find phy
[ 0.909369] SATA: Adjusting los_lvl (rd_val=0x8a46, wr_val=0x8ae6)
[ 0.915538] SATA: Adjusting rx_term_en0/1 (rd_val=0x2750275, wr_val=0x2770277)
[ 0.922727] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled
[ 0.929700] ahci-stb e0638000.sata: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
[ 0.938515] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs
[ 0.949122] scsi0 : ahci_platform
[ 0.952776] scsi1 : ahci_platform
[ 0.956200] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39
[ 0.964042] ata2: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x180 irq 39
[ 0.972773] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba TC58NVG3S0F 8G 3.3V 8-bit), 1024MiB, page size: 4096, OOB size: 232
[ 0.985661] Bad block table found at page 262080, version 0x01
[ 0.992067] Bad block table found at page 262016, version 0x01
[ 1.001485] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30
[ 1.007235] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)
[ 1.014111] tun: Universal TUN/TAP device driver, 1.6
[ 1.019065] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.025619] DWMAC1000
[ 1.027897] stmmac - user ID: 0x25, Synopsys ID: 0x35
[ 1.032950] Ring mode enabled
[ 1.035930] DMA HW capability register supported
[ 1.040443] Enhanced/Alternate descriptors
[ 1.044741] Enabled extended descriptors
[ 1.048717] RX Checksum Offload Engine supported (type 2)
[ 1.054172] TX Checksum insertion supported
[ 1.058393] Wake-Up On Lan supported
[ 1.062100] Enable RX Mitigation via HW Watchdog Timer
[ 1.070393] libphy: stmmac: probed
[ 1.073713] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 1.080122] eth%d: PHY ID 001cc915 at 5 IRQ POLL (stmmac-0:05)
[ 1.086504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.092967] ehci-platform: EHCI generic platform driver
[ 1.098211] ehci-platform e066c000.usb: EHCI Host Controller
[ 1.103827] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1
[ 1.111692] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000
[ 1.130147] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00
[ 1.136305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.143021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.150169] usb usb1: Product: EHCI Host Controller
[ 1.154994] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
[ 1.160450] usb usb1: SerialNumber: e066c000.usb
[ 1.165657] hub 1-0:1.0: USB hub found
[ 1.169335] hub 1-0:1.0: 1 port detected
[ 1.173537] ehci-platform e066d000.usb: EHCI Host Controller
[ 1.179121] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2
[ 1.187035] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000
[ 1.210091] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00
[ 1.216246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.222951] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.230105] usb usb2: Product: EHCI Host Controller
[ 1.234932] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd
[ 1.240385] usb usb2: SerialNumber: e066d000.usb
[ 1.245575] hub 2-0:1.0: USB hub found
[ 1.249249] hub 2-0:1.0: 1 port detected
[ 1.253596] usbcore: registered new interface driver usb-storage
[ 1.259661] usbcore: registered new interface driver usbserial
[ 1.266093] sdhci: Secure Digital Host Controller Interface driver
[ 1.272209] sdhci: Copyright(c) Pierre Ossman
[ 1.276565] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 Version is 0x75
[ 1.284051] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 found @ [feb35000] (rev 7501)
[ 1.340088] mmc0: SDHCI controller on IP_3413 [e0635000.sdhci] using ADMA
[ 1.347077] usbcore: registered new interface driver usbhid
[ 1.352585] usbhid: USB HID core driver
[ 1.356670] TCP: cubic registered
[ 1.359901] NET: Registered protocol family 17
[ 1.364536] Key type dns_resolver registered
[ 1.368841] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 1.376383] ThumbEE CPU extension supported.
[ 1.381913] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.387903] ### dt-test ### No testcase data in device tree; not running tests
[ 1.600095] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 1.730104] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.735662] MTD: MTD device with name "root0" not found.
[ 1.740956] VFS: Cannot open root device "mtd:root0" or unknown-block(0,0): error -2
[ 1.748585] Please append a correct "root=" boot option; here are the available partitions:
[ 1.756932] 1f00 1048576 mtdblock0 (driver?)
[ 1.761898] 1f01 4096 mtdblock1 (driver?)
[ 1.766906] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 1.775118] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.93 #1
[ 1.781125] [<80014058>] (unwind_backtrace+0x0/0xe8) from [<80011128>] (show_stack+0x10/0x14)
[ 1.789562] [<80011128>] (show_stack+0x10/0x14) from [<803d3e40>] (panic+0xa0/0x1ec)
[ 1.797254] [<803d3e40>] (panic+0xa0/0x1ec) from [<8067b090>] (mount_block_root+0x1e8/0x290)
[ 1.805624] [<8067b090>] (mount_block_root+0x1e8/0x290) from [<8067b2e8>] (prepare_namespace+0x9c/0x188)
[ 1.815040] [<8067b2e8>] (prepare_namespace+0x9c/0x188) from [<8067ad08>] (kernel_init_freeable+0x224/0x234)
[ 1.824818] [<8067ad08>] (kernel_init_freeable+0x224/0x234) from [<803cf190>] (kernel_init+0xc/0x150)
[ 1.833963] [<803cf190>] (kernel_init+0xc/0x150) from [<8000da60>] (ret_from_fork+0x14/0x34)
Starting Microloader ASM built on Jan 08 2014 14:32:26...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: APOLLO
Found External Realtek 8211EG PHY on GMAC0...
Checking for Guide button press ...
Waiting for flash downloading ...
Starting Microloader ASM built on Jan 08 2014 14:32:26...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: APOLLO
Found External Realtek 8211EG PHY on GMAC0...
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
Setting up default ATAG list...
Jumping to U-Boot ...
9
--------------------------------------------------------------------------------
| U-Boot 2009.08-00048-g19618f5 (Dec 24 2013 - 17:45:56) CST HDx |
|------------------------------------------------------------------------------|
| Chipset information |
| Vendor: NXP Type: Apollo Revision: M1 Fuses: 0015706B |
|------------------------------------------------------------------------------|
| Clock information |
| *** not available yet *** |
|------------------------------------------------------------------------------|
| Frontpanel information |
| Vendor: CST Version: 4.1 Display: OLED (256 x 64 px) |
|------------------------------------------------------------------------------|
| Memory configuration |
| Start | End | Type | Description |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM | System main memory bank #0 (256M) |
| 20000000 | 2FFFFFFF | RAM | System main memory bank #1 (256M) |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) |
*** Warning - bad CRC or SFC, using default environment
| 00000000*| 3FFFFFFF*| NAND | Toshiba TC58NVG3S0F 8G 3.3V 8-bit |
|------------------------------------------------------------------------------|
| Network configuration |
| MAC: LIP 6300 address: 00-C5-5C-29-BB-32 |
--------------------------------------------------------------------------------
Hit any key to stop autoboot: 3
Emergency update from usb
(Re)start USB...
USB: Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
reading uldr.bin
** Unable to read "uldr.bin" from usb 0:1 **
** Skipping uldr.bin **
reading u-boot.bin
** Unable to read "u-boot.bin" from usb 0:1 **
** Skipping u-boot.bin **
reading vmlinux.ub.gz
2971152 bytes read
SFC erase: offset 0x100000, size 0x300000
OK
SFC write: offset 0x100000, size 0x300000
3145728 bytes written: OK
reading rootfs.arm.jffs2.nand
57731952 bytes read
NAND erase: device 0 offset 0x0, size 0x10000000
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
Erasing at 0xffc0000 -- 100% complete.
OK
NAND write: device 0 offset 0x0, size 0x370eb70
57731952 bytes written: OK
reading appfs.jffs2.nand
** Unable to read "appfs.jffs2.nand" from usb 0:1 **
** Skipping appfs.arm.jffs2.nand **
reading rootfs1.arm.jffs2.nand
** Unable to read "rootfs1.arm.jffs2.nand" from usb 0:1 **
** Skipping rootfs1.arm.jffs2.nand **
reading appfs1.jffs2.nand
** Unable to read "appfs1.jffs2.nand" from usb 0:1 **
** Skipping appfs1.arm.jffs2.nand **
reading extra.nand
** Unable to read "extra.nand" from usb 0:1 **
** Skipping extra.nand **
resetting ...
Starting Microloader ASM built on Jan 08 2014 14:32:26...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: APOLLO
Found External Realtek 8211EG PHY on GMAC0...
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
Setting up default ATAG list...
Jumping to U-Boot ...
9
--------------------------------------------------------------------------------
| U-Boot 2009.08-00048-g19618f5 (Dec 24 2013 - 17:45:56) CST HDx |
|------------------------------------------------------------------------------|
| Chipset information |
| Vendor: NXP Type: Apollo Revision: M1 Fuses: 0015706B |
|------------------------------------------------------------------------------|
| Clock information |
| *** not available yet *** |
|------------------------------------------------------------------------------|
| Frontpanel information |
| Vendor: CST Version: 4.1 Display: OLED (256 x 64 px) |
|------------------------------------------------------------------------------|
| Memory configuration |
| Start | End | Type | Description |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM | System main memory bank #0 (256M) |
| 20000000 | 2FFFFFFF | RAM | System main memory bank #1 (256M) |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 ( 4M / 64K x 64) |
*** Warning - bad CRC or SFC, using default environment
| 00000000*| 3FFFFFFF*| NAND | Toshiba TC58NVG3S0F 8G 3.3V 8-bit |
|------------------------------------------------------------------------------|
| Network configuration |
| MAC: LIP 6300 address: 00-C5-5C-29-BB-32 |
--------------------------------------------------------------------------------
Hit any key to stop autoboot: 0
SFC read: offset 0x100000, size 0x300000
3145728 bytes read: OK
## Booting kernel from Legacy Image at 01000000 ...
Image Name: NI Apollo Kernel
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2971088 Bytes = 2.8 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 3.10.93 (neutrino-images@nisrv) (gcc version 6.3.1 20170109 (crosstool-NG crosstool-ng-1.23.0-36-g1dbb06f2-dirty) ) #1 SMP Tue Dec 8 00:23:57 CET 2020
[ 0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Entropic Apollo STB Platform with FDT, model: CoolStream HD2 Apollo STB
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Early platform io descriptors mapping...
[ 0.000000] PERCPU: Embedded 7 pages/cpu @80910000 s5952 r8192 d14528 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=nx_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);nx_2017:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rootflags=noatime rw
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 256MB 256MB = 512MB total
[ 0.000000] Memory: 246960k/246960k available, 277328k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB)
[ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x80679dc4 (6600 kB)
[ 0.000000] .init : 0x8067a000 - 0x806a9740 ( 190 kB)
[ 0.000000] .data : 0x806aa000 - 0x806ebd60 ( 264 kB)
[ 0.000000] .bss : 0x806ebd60 - 0x80707424 ( 110 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:388
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] GIC CPU mask not found - kernel will fail to boot.
[ 0.000000] smp_twd: clock not found -2
[ 0.000000] Unable to get timer clock. Assuming 50Mhz input clock.
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] stb-timer: system timer (irq = 58, rate 50000000)
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.253805] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.292713] pid_max: default: 32768 minimum: 301
[ 0.297598] Mount-cache hash table entries: 512
[ 0.304482] CPU: Testing write buffer coherency: ok
[ 0.309634] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.315288] Setting up static identity map for 0x803dd018 - 0x803dd070
[ 0.321853] L310 cache controller enabled
[ 0.325780] l2x0: 8 ways, CACHE_ID 0x410004c4, AUX_CTRL 0x32421001, Cache size: 131072 B
[ 0.334584] Brought up 1 CPUs
[ 0.337460] SMP: Total of 1 processors activated (996.14 BogoMIPS).
[ 0.343701] CPU: All CPU(s) started in SVC mode.
[ 0.349170] devtmpfs: initialized
[ 0.360673] NET: Registered protocol family 16
[ 0.365808] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.519201] GMAC0: active interface is 6
[ 0.523137] ChipID=0x1 ChipRevID=0x2
[ 0.526747] nx_dmac: Registered with 8 channels
[ 0.536831] bio: create slab <bio-0> at 0
[ 0.541503] GPIO: base febd5000 (phys e06d5000)
[ 0.546174] GPIO: base feb69000 (phys e0669000)
[ 0.551233] SCSI subsystem initialized
[ 0.555394] usbcore: registered new interface driver usbfs
[ 0.560881] usbcore: registered new interface driver hub
[ 0.566221] usbcore: registered new device driver usb
[ 0.571318] pps_core: LinuxPPS API ver. 1 registered
[ 0.576180] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.585291] PTP clock support registered
[ 0.590284] cfg80211: Calling CRDA to update world regulatory domain
[ 0.597693] Switching to clocksource timer_us
[ 0.609853] NET: Registered protocol family 2
[ 0.615178] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.622273] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.628701] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.635033] TCP: reno registered
[ 0.638183] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.644027] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.650540] NET: Registered protocol family 1
[ 0.655193] RPC: Registered named UNIX socket transport module.
[ 0.661049] RPC: Registered udp transport module.
[ 0.665673] RPC: Registered tcp transport module.
[ 0.670350] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.676932] PM: STB Platform power mgmt initialization.
[ 0.825173] bounce pool size: 64 pages
[ 0.836096] NFS: Registering the id_resolver key type
[ 0.841147] Key type id_resolver registered
[ 0.845230] Key type id_legacy registered
[ 0.849220] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.855675] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.863120] msgmni has been set to 482
[ 0.867984] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.875330] io scheduler noop registered
[ 0.879160] io scheduler deadline registered
[ 0.883622] io scheduler cfq registered (default)
[ 0.888614] e06e2000.serial: ttyS0 at MMIO 0xe06e2000 (irq = 47) is a uart-ip3106
[ 0.900701] loop: module loaded
[ 0.904210] ahci-stb e0638000.sata: unable to find phy
[ 0.909257] SATA: Adjusting los_lvl (rd_val=0x8a46, wr_val=0x8ae6)
[ 0.915426] SATA: Adjusting rx_term_en0/1 (rd_val=0x2750275, wr_val=0x2770277)
[ 0.922613] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled
[ 0.929588] ahci-stb e0638000.sata: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
[ 0.938403] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs
[ 0.949016] scsi0 : ahci_platform
[ 0.952665] scsi1 : ahci_platform
[ 0.956098] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39
[ 0.963939] ata2: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x180 irq 39
[ 0.972675] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba TC58NVG3S0F 8G 3.3V 8-bit), 1024MiB, page size: 4096, OOB size: 232
[ 0.985555] Bad block table found at page 262080, version 0x01
[ 0.991956] Bad block table found at page 262016, version 0x01
[ 1.001373] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30
[ 1.007124] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)
[ 1.014015] tun: Universal TUN/TAP device driver, 1.6
[ 1.018972] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.025524] DWMAC1000
[ 1.027802] stmmac - user ID: 0x25, Synopsys ID: 0x35
[ 1.032854] Ring mode enabled
[ 1.035836] DMA HW capability register supported
[ 1.040349] Enhanced/Alternate descriptors
[ 1.044647] Enabled extended descriptors
[ 1.048624] RX Checksum Offload Engine supported (type 2)
[ 1.054079] TX Checksum insertion supported
[ 1.058299] Wake-Up On Lan supported
[ 1.062005] Enable RX Mitigation via HW Watchdog Timer
[ 1.070291] libphy: stmmac: probed
[ 1.073608] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 1.079999] eth%d: PHY ID 001cc915 at 5 IRQ POLL (stmmac-0:05)
[ 1.086433] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.092893] ehci-platform: EHCI generic platform driver
[ 1.098141] ehci-platform e066c000.usb: EHCI Host Controller
[ 1.103758] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1
[ 1.111625] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000
[ 1.130147] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00
[ 1.136309] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.143024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.150170] usb usb1: Product: EHCI Host Controller
[ 1.154995] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
[ 1.160451] usb usb1: SerialNumber: e066c000.usb
[ 1.165658] hub 1-0:1.0: USB hub found
[ 1.169333] hub 1-0:1.0: 1 port detected
[ 1.173538] ehci-platform e066d000.usb: EHCI Host Controller
[ 1.179122] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2
[ 1.187037] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000
[ 1.210091] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00
[ 1.216247] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.222949] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.230105] usb usb2: Product: EHCI Host Controller
[ 1.234933] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd
[ 1.240386] usb usb2: SerialNumber: e066d000.usb
[ 1.245573] hub 2-0:1.0: USB hub found
[ 1.249247] hub 2-0:1.0: 1 port detected
[ 1.253597] usbcore: registered new interface driver usb-storage
[ 1.259662] usbcore: registered new interface driver usbserial
[ 1.266104] sdhci: Secure Digital Host Controller Interface driver
[ 1.272217] sdhci: Copyright(c) Pierre Ossman
[ 1.276574] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 Version is 0x75
[ 1.284059] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 found @ [feb35000] (rev 7501)
[ 1.340088] mmc0: SDHCI controller on IP_3413 [e0635000.sdhci] using ADMA
[ 1.347078] usbcore: registered new interface driver usbhid
[ 1.352588] usbhid: USB HID core driver
[ 1.356667] TCP: cubic registered
[ 1.359893] NET: Registered protocol family 17
[ 1.364536] Key type dns_resolver registered
[ 1.368842] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 1.376385] ThumbEE CPU extension supported.
[ 1.381912] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.387905] ### dt-test ### No testcase data in device tree; not running tests
[ 1.600094] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 1.730103] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.735664] MTD: MTD device with name "root0" not found.
[ 1.740969] VFS: Cannot open root device "mtd:root0" or unknown-block(0,0): error -2
[ 1.748593] Please append a correct "root=" boot option; here are the available partitions:
[ 1.756941] 1f00 1048576 mtdblock0 (driver?)
[ 1.761908] 1f01 4096 mtdblock1 (driver?)
[ 1.766915] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 1.775127] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.93 #1
[ 1.781133] [<80014058>] (unwind_backtrace+0x0/0xe8) from [<80011128>] (show_stack+0x10/0x14)
[ 1.789570] [<80011128>] (show_stack+0x10/0x14) from [<803d3e40>] (panic+0xa0/0x1ec)
[ 1.797264] [<803d3e40>] (panic+0xa0/0x1ec) from [<8067b090>] (mount_block_root+0x1e8/0x290)
[ 1.805633] [<8067b090>] (mount_block_root+0x1e8/0x290) from [<8067b2e8>] (prepare_namespace+0x9c/0x188)
[ 1.815049] [<8067b2e8>] (prepare_namespace+0x9c/0x188) from [<8067ad08>] (kernel_init_freeable+0x224/0x234)
[ 1.824829] [<8067ad08>] (kernel_init_freeable+0x224/0x234) from [<803cf190>] (kernel_init+0xc/0x150)
[ 1.833972] [<803cf190>] (kernel_init+0xc/0x150) from [<8000da60>] (ret_from_fork+0x14/0x34)
